Stefan here at Revival Cycles invested quite a bit of time searching for the best options available for protecting all the wiring on your new m-Unit install. To suit your needs we're offering our loom as a comprehensive kit in addition to by the foot.
PVC vinyl tubing is made for automotive wiring and is what you often find on OEM motorcycle harnesses. It makes for a clean, tidy appearance of visible wiring while providing a high level of protection from the harsh environment your system will be exposed to. This PVC vinyl tubing is extremely flexible, liquid tight, abrasion resistant and meets VW-1 flammability along with UL type B standards making it a great choice for motorcycle wiring harnesses.
We often use Vinyl Loom as a part of a system, incorporating Vinyl Loom for exposed areas, Split Loom under the tank and seat with Tesa Harness Tape at terminations, as well as Heat Shrink and Heat Shielding as necessary. This arrangement can produce a harness as good as any OEM.
We took the average lengths we generally use on a build and added a few more feet of each length just to be sure we've got you covered, If you're conservative with your cuts you may be able to get two bikes out of a single kit. You can find the full breakdown of the lengths provided in the Details tab. If you want to get nerdy on specifics all of the classifications as well as manufacturer approvals can be found in the Specs tab.
|1/8in / 3.175mm||5ft / 1.524m|
|3/16in / 4.762mm||10ft / 3.048m|
|1/4in / 6.35mm||10ft / 3.048m|
|5/16in / 7.937mm||5ft / 1.524m|
|3/8in / 9.525mm||5ft / 1.524m|
|1/2in / 12.7mm||4ft / 1.2192m|
|5/8in / 15.87mm||2ft / 0.6096m|
- MIL-63ID specs
- VW-1 flammability standards
- UL type B ratings
- Max Temp 221° F (105° C)
- Min Temp -4°F (-20° C)