Revival Cycles Signature Universal Brake and Clutch Cable Kit

$34.00 - $52.00
(No reviews yet) Write a Review
Brake and Clutch levers are not all alike and any time you're installing an aftermarket cable pull brake or clutch perch you'll almost certainly have to build a new cable to go with it.
 
Our Signature Universal Brake & Clutch Cable Kit contains all the necessary components to help you build your own high quality cable.
 
We've collaborated with the experts at Venhill Engineering to develop a kit to service all of the levers available here on our site as well as nearly any other lever you might come across.
 
Each kit provides enough material to build a single cable along with with a selection of ferrules, elbows, adjusters a variety of the most common nipples with a spare of each in case you need a do over.
 
Highlights:
  • Black or Clear Braided cable housing to match our Hydraulic Brake Lines and Fittings.
  • Spiral wound steel conduit covered in tough PVC.
  • Smooth action Teflon liner.
  • Galvanized steel cable for easy soldering and durability.
  • A torch and basic soldering tools required for assembly. Don't forget to check out our Control Cable Bird Cage Tool!
Each kit includes:
  • 1.35 meters (4.4 feet/4 feet 4.8 inches/54.8 inches) of 8mm OD braided PVC coated, spiral wound, Nylon lined outer conduit
  • 1.6 meters (5.25 feet/5 feet 3 inches/63 inches) of 2mm OD galvanized steel wire (1 x 19 strand)
  • 2 x ferrule, 7mm OD nose
  • 2 x ferrule, 7mm OD nose
  • 1 x neoprene adjuster boot
  • 2 x brass barrel nipple, 8mm DIA x 9mm
  • 2 x brass barrel nipple, 6mm DIA x 10mm (2.1mm bore)
  • 2 x brass trumpet nipple, 6mm -> 3.5mm OD, 2.5 ID, 9.5mm length
  • 2 x brass bar nipple 10mm DIA x 10mm, slotted
  • 1 x N8 nylon nipple sleeve, 8mm OD
  • 1 x N10 nylon nipple sleeve, 3/8" OD
  • 1 x Accordion Adjuster Boot
  • 1 x BMW clutch cable fitting
  • 1 x Lock nut M8 x 1.25mm
  • 1 x Steel adjuster screw M8 x 1.25 x 42mm