Revival Cycles Loom Kit

Revival Signature Complete Wire Harness Loom Kit

4 reviews Regular price $85.00
/
Shipping calculated at checkout.

We’ve spent quite a bit of time researching and collecting the best, industrial-grade automotive loom components on the market into one comprehensive kit providing with everything you need to build a harness as good, and in some cases better, as an OEM manufacturer. This kit will protect your harness from weather, abrasion, oil, fuel, solvents, engine heat and to some extent exhaust temperatures.

Protect your new wiring harness end to end from the elements, helping to ensure it has a long life and you spend more time on the road than you do on the side of it. 

Included in the kit you’ll find PVC Vinyl Loom, Woven Split Loom, Double-walled, adhesive lined Heat Shrink and Tesa Fabric Tape. 

When assembling this kit we took the average lengths we generally use on a build and added a few more feet of each just to be sure we've got you covered. But if your swinging from ape hangars or find another need additional Vinyl and Split loom can be purchased by the foot here in our store.

Our system incorporates Vinyl Loom for exposed areas to protect from weather, Split Loom under the tank and seat to allow for drainage with Tesa Tape at transitions from one Loom to another, as well as Heat Shrink at loom terminations. This arrangement can produce a harness that will keep the elements out but allow for drainage should water get in so that your harness isn’t steeping in it, allowing for slow absorption through the wire sheathing resulting in corrosion and increased wire resistance and electrical failure. 

You can find descriptions for each material as well as lengths or quantities provided in the Details tab. Click on the Specs tab if you want to get nerdy on the specifics all of the classifications, as well as manufacturer approvals.

Vinyl Loom
Diameter Length
1/8in / 3.175mm 5ft / 1.524m
3/16in / 4.762mm 6ft/1.8288
1/4in / 6.35mm 6ft/1.8288
5/16in / 7.937mm 3.5ft/1.0668
3/8in / 9.525mm 5ft / 1.524m
1/2in / 12.7mm 4ft / 1.2192m
5/8in / 15.87mm 2ft / 0.6096m

PVC vinyl tubing is made for automotive wiring and is what you often find on OEM motorcycle harnesses. It makes for a clean, tidy appearance of visibly exposed wiring while providing a high level of protection from the harsh environment your system will be exposed to. This PVC vinyl tubing is extremely flexible, liquid-tight, abrasion-resistant and meets VW-1 flammability along with UL type B standards which is why it’s the industry standard for motorcycle wiring harnesses. 

Split Loom
Diameter Length
5mm 5ft (3.048m)
8mm 3ft/0.9144
13mm 2ft (0.6096m
19mm 2.5ft (0.762m)
25mm 2ft (0.6096m)

 

Our Split Loom is an industrial-grade product approved for use by nearly every automotive manufacturer you can think of. The high-density flat-knit weave combination of PET monofilament and textured Multifilament won't unravel at the ends and provides superior abrasion resistance while it protects your wiring from fluids by allowing moisture to drain away.  It is s the creme de la creme of harness solutions providing durable, heat resistant protection while being the easiest option to work with. No fishing wires down a tube, or tape wrapping; add, remove or inspect wiring without deconstructing your harness apart in the process. The high-density flat-knit weave combination of PET monofilament. 

Tesa Tape
Length 25 Meters
Width 19 MM

Tesa Cloth Harness Tape is not your run of the mill electrical tape. The industrial-grade harness tape designed for use in the inhospitable environs of engine bays and is the very same tape used by Mercedes, VW and numerous other automotive manufacturers. Made from abrasion-resistant PET cloth and backed with an acrylic adhesive, this tape has high tensile strength and the adhesive will not turn to goo when exposed to heat or fuel. You can use this tape to wrap an entire harness and rest assured that it won't become a sticky dirty mess. 

Dual-Wall Heat Shrink
Cut to 6" lengths
Diameter quantity
1/8" 2
3/16" 4
1/4" 6
3/8" 4
1/2" 2
3/4" 1
1" 1

Polyolefin Dual-Walled Heat Shrink has a myriad of applications when wiring a bike. Heat shrink can be used for an added layer of protection from abrasion, chaffing, fatigue, and strain relief to the wire as well as joints and terminals. A Cross-linked treatment closes the pores in the PVC decreasing the ability for fluids to find a way in, the hot melt glue inner layer further seals out water, fuel, and solvents from entering from the sides and at the endpoints. Secure wire loom in its place while helping seal moisture out of PVC Vinyl Loom terminations.

Applications:

  • In-line Splicing
  • Terminal Sealing
  • Strain Relief
  • Mechanical Protection
  • Connector Sealing
Vinyl Loom
SPECS
MIL-63ID specs
VW-1 flammability standards
UL type B ratings
Max Temp 221° F (105° C)
Min Temp -4°F (-20° C)
Split Loom
Physical Properties Specification Unit Value
Min/Max Continous Temperature --------------- F° (C°) -40°/302°F (-40/150°C)
Peak Temperature (240h) --------------- F° (C°) 347°F (175°C)
Melting Point ISO 11357-3 F° (C°) 500°F (260°C)
Abrasion Resistance ISO 6722
SAE ARP 1536 A
LV 312
RSA 36 05 035 B
cycles 6450
244714
2400
MG4 (C)
Flammability FMVSS 302
SAE J 369
mm/min
---------
<100
self-extinguishing
Chemical resistance SAE J 2192
D7 1924
--------- Resists the majority of chemicals and Automotive fluids (oils, coolant, battery acid, brake fluid, fuels, windshield washer...)
Manufacturer Approvals:
Direct Christler, Ford, GM, Iveco/CNH, Jaguar/Landrover, Peugeot-Citrogen, Renault, Volvo, Toyota.
Via Tier-1 Honda, Mazda
Dual-Wall Heat Shrink
Standards and Certifications
3:1 shrink ratio
Shrink temperature: 90°C
Continuous operating temperature: -55°C to 110°C
UL 224, 125°C
CSA C22.2 No.198.1 125°C
AMD-DTL-23053/4, Class 3
UL/CSA approval 
Tesa Tape
BACKING MATERIAL PET CLOTH
TOTAL THICKNESS 10.23 MILS
TYPE OF ADHESIVE ADVANCED ACRYLIC
ADHESION TO STEEL 45.68 OZ/IN
ELONGATION AT BREAK 40 %
TENSILE STRENGTH 157.02 LBS/IN
TEMPERATURE RESISTANCE MIN. -40 °F
TEMPERATURE RESISTANCE (3000H): 302 °F
ABRASION RESISTANCE (10MM MANDREL): CLASS D (ACC. TO LV312)
ABRASION RESISTANCE (5MM MANDREL): CLASS D (ACC. TO LV312)
FLAME RESISTANCE CLASS B (ACC. TO LV312)
UNWIND FORCE (ROLL WIDTH > 9MM): 11 N/ROLL (30 M/MIN)
NOISE DAMPING


Reviews

Customer Reviews
5.0 Based on 4 Reviews
5 ★
100% 
4
4 ★
0% 
0
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
J
03/23/2021
Joel

Couldn't be happier

Exactly everything you need to tidy up those wires! Definitely worth the money. Revival came through with yet another great kit.

DR
01/20/2021
Dave R.

I love this loom kit!

I am currently building a custom motorcycle using an M unit blue and deluxe wiring kit. These looms are a must have if you are building a custom bike. If you are going to spend the time to make everything look beautiful these looms are a perfect choice. I especially like the split loom it goes on easy and has a great looking durable finish. Tesa tape is an awesome product too . Revival has taken the time to **** through many products to find the best. If they use it, it’s top quality.

RS
12/01/2020
Rob S.

Wire harness loom kit

I haven't had a chance to use this excellent looking kit as yet but it looks first rate and in conjunction with the deluxe wiring kit and ferrel crimping tool should be excellent, but the real prize is all the help and advice the guys at revival gave me prior to the purchase of the items.

AD
11/17/2019
Alejandro D.

Awesome assortment

Used these to rewire my 1975 Honda CB550F with the M-Unit blue. Used mostly all of them and they are better then the ones you would buy at you hardware store because they seal everything in with a plastic coating. Highly recommend for rewiring anything. The only part that was left over was the biggest one which I ended up using for my spear fishing pole to get a beefed grip and it’s rock solid now in the water.


Touring the Ultimate Porsche Destination with Magnus Walker

DAILY NO. 125

From our customers

★★★★★

100% impressed over and over again by Jeff & Co at Revival. They’re patient and kind no matter the enquiry (currently resto-modding an R100/7 and have LOTS of questions about the Motogadget rewire) and go out of their way to offer creative solutions and out of the box thinking. I will forever return and recommend Revival.

Theo B.
North Vancouver, BC
★★★★★

I cannot recommend Revival Cycles enough. Not only do they have a great assortment of gear and accessories but they provide superb customer service. I was having some difficulty making it work... Jeff pointed out what I was missing and also provided schematics to make it work. Thank you guys very kindly, your crew rocks.

Svend P.
Santa Fe, NM

You may also like


Recently viewed