New Triumph owners, have no fear because there is finally an exclusive adapter only offered by Motogadget, the m-TRISignal Adapter, specifically designed for modern Triumph Twin and Triple models with CAN bus technology! Revival Cycles is proud to offer some of the most sophisticated and advanced technology out on the market today and this is one of them.
For the first time, it is now possible to remove the big bulky plastic factory original gauges and instruments on the Triumph 2-cylinder models (2011 and later) and 3-cylinder models (2006 and later) and simply plug in a sleek, aluminum and glass, nearly indestructible single gauge.
Except for the 'Breakout Box', exclusively designed for Motogadget Motoscope Pro there was no way to operate a Motogadget instrument without a complete bike rewire. Once the original instrument was disconnected, the built-in CAN bus of these models instantly became inoperative. No mods were even possible.
The solution's specially designed for use with Twin models has arrived: the m-TRI, exclusively by Motogadget at Revival Cycles.
The m-TRI not only provides engine speed and ground speed, but also the signals for the *indicator lights: left/right turn signal, low fuel indicator, error memory, high beam, neutral, water temp HIGH, and oil pressure.
*Some of the indicator lights on instruments with 4 or 5 LEDs are multi-functional.
Another big advantage of this unit is the fool-proof installation. The original connector is used, and the cables for the instrument and indicator lights are connected to the terminals of the m-TRI with color codes. No soldering or cable detection. No changing the wiring harness. No voiding the vehicle warranty. This is just truly plug and play.
Update your new Triumph with something robust and tasteful.
Does NOT work with the Motoscope Pro!
Currently, the models listed above are available. Further models/years will gradually follow.
Please select your model and its model year. Please note that the model year is not necessarily identical to the year of manufacture! To find the correct model year, one can locate it on the VIN number (you have to use that letter to clearly identify the model year). It is the 10th digit from the right on the Triumph VIN numbers.
A = 2010
B = 2011
C = 2012
D = 2013
And so on...
Dimensions:Length/ Width/ Height: 42 mm/ 42 mm/ 27 mm
Scope of delivery: m-TRI adapter; connector (matching the model selected); end ferrules; 2x M3 screws; cable holder; cable ties.
For more documentation about the use, compatibility, and installation of the Motogadget m-TRI, please consult the manuals here.