null

m-Blaze Disc LED Turn Signal

$113.00
(38 reviews) Write a Review
Always make sure to order a complete set consisting of the left and right side turn signal assembly as these are sold individually!

Revival Cycles introduces the very cool and amazingly well-made Motogadget m-Blaze Disc LED turn signals*. The Disc is easily our favorite of the m-Blaze series. Discreet and sleek are two characteristics delivered consistently by Motogadget, not to mention durability, and the Disc has it all.

These can be fitted with any style of grips. Keep in mind the O.D. being 35mm, they will have a simpler time fitting into a bar end in similar size. For example, 1-inch grips or aluminum grips like the m-Grip.

All Motogadget products are known to be the finest available and these are no exception. These are all made in Germany! Several of our client's machines now run these signals and all have been very happy with their quality. These allow you to keep the safety and the looks while allowing you to answer the old question of "signals or no signals?" This is not just another cheap set of signals that will fade in the sun and get broken off after becoming brittle. These will last a lifetime.

Buy just one pair of signals and discover the bonus that these cover you from the front or the rear without you needing four signals. Simply install this pair and you will not be missed by drivers anywhere near your machine. This also gives you the ability to simplify the wiring, cut down on visual clutter aesthetically and be certain that your intentions will be seen!

Motogadget's take:

m-Blaze Disc by Motogadget 

The m-Blaze disc is the turn signal light of the latest generation.
A familiar fixture has been completely rethought, designed and implemented technically very demanding.
Through the new TranzLight Technology (TLT, patent pending) motogadget the transparent plate of the indicator to light medium.

TranzLight Technology ® cleverly uses the total internal reflection of light waves at interfaces of media with different optical density. This progressive approach to development is not limited to simple miniaturization of turn signal housings designed but the light directly over a crystal-like plastic body.
calculation is only accurate optical CAD cutting edge manufacturing processes enable this new design and its function.

The light flux required for the TranzLight principle is generated by the motogadget developed intensiLED ® process consists of three major components:
- specially selected, phosophorkonvertierte high performance LED with the highest efficiency and a total power of 3W with a lifespan of over 50,000 hours
- a controlled with 330kHz clocked, IC constant current source
- a special collimator, which couples the wide scattering of the LED light precisely in the plastic body.

A greatly reduced, discreet aluminum housing on the base serves only the stable attachment of the vitreous and the integration of control electronics and high-end LEDs.
course, the housing from solid aluminum is made, black anodized or polished and finely inscribed by laser. The m-Disc Blaze is very flat and appear neutral and unobtrusively through the transparent glass. Thus it is suitable for many styles and a wide variety of motorcycles.
Especially with our m-grip handles or other Alugriffen closes its base from very harmonious.

The presented bar end turn signals m-Blaze disc has a CE mark and is approved as a front indicator.
Package: Single bar end turn signals m-Blaze disc left or right with clamp for steel and aluminum handlebar (22 mm and 1 inch Handlebars ) having an inner diameter of 14 mm to 21 mm, with a connecting cable 50 cm.

Outer Diameter: 35 mm
Total length over all: approx 68 mm
of length outside of the handlebar 20 mm
of length within the handlebars: 48 mm
Cable length: 50 cm
Weight: 40 g
Fixing: comes with rubber clamps for metric steel and aluminum handlebar (22mm and 1 inch handlebar) with an inner diameter of 14 mm to 21 mm

Power consumption: 3 watts

The turn signal, like any other conventional LED signal, can be operated with load resistors or any of the load-independent flasher relays offered by Motogadget.

For more documentation about the use and installation of the Motogadget m-Blaze Disc turn signals, you can consult the manual here.

Videos Hide Videos Show Videos

38 Reviews Hide Reviews Show Reviews

  • 5
    BRIGHT

    Posted by Joey R. on Apr 16th 2021

    They don’t lie when they say how slim and bright they are.

  • 5
    BRIGHT

    Posted by Joey R. on Apr 16th 2021

    They don’t lie when they say how slim and bright they are.

  • 5
    M-Blaze Disc Led Turn signals

    Posted by Knucklehead Bill on Apr 4th 2021

    I had to have working turn signals as a requirement for receiving a Assigned VIN for my new chopper. I considered buying some lower quality eastern made stuff. But for just a little more ...I bought something that I was proud to add to my new Build and it meets the states requirements . The also are very bright also!

  • 5
    Guys @ Revival Cycle Are The Best!!!!

    Posted by Sean on Jan 6th 2021

    Revival Cycle is the place to go for your bike. The crew here is knowledgeable, helpful, & love motorcycles! Thanks for all of your help!

  • 5
    Great Lookin

    Posted by Sean B. on Dec 15th 2020

    These bar end turn signals look amazing and are relatively easy to install. The guys at REVIVAL are a great resource for troubleshooting.
    Thanks REVIVAL!

  • 5
    M- blaze turn signals

    Posted by Axel Z. on Nov 21st 2020

    Very well made attractive units which are also very bright

  • 5
    Motogadet M-Blaze Dissc - Great product - super bright!!!

    Posted by Ron on Jul 10th 2019

    really good product!

  • 4
    VERY NICE TURN SIGNALS

    Posted by G S. on May 15th 2019

    These are the best turn signals I have seen for a Motorcycle. I was looking for turn signals for signals L/R front and rear. These are great since mounting is on the handle bars and only two are needed for the bike. Mounting is easy but you have to work the plugs into the handle bar ends. Working them into the bar takes some patience and following the directions for installation. I cleaned the powder coat out of the inside of the bar ends, and lubed the mounting plugs with spit and rocked the turn signal as I pushed it into the bar. Soapy water may work for anyone who doesn't like spiting on the rubber mounting plugs. The manuf. doesn't want you using grease, because you need to spin the housing CW to tighten the rubber plug to lock the turn signals location in place . Real easy, very High Quality, and really really Cool device. I liked that I didn't have to fab mounts and I only needed two of these signals for the bike.

  • 5
    Purrrty sweeeet

    Posted by Doland S. on Mar 22nd 2018

    Well made and bright.