Resistors are not our favorite way to solve hyper flashing indicator lights but they do have their uses. We frequently receive requests for them so we've added them to our store for your convenience. Whenever possible we recommend solving hyper flashing turn signals by upgrading to an LED compatible relay If your signals or other lights are regulated by the ECU and it's throwing error codes or your indicators are hyper flashing these may be the solution to your problem.
We offer a 20 Watt / 8.5 Ohm for heavy duty requirements. These are sold in pairs, you will need one for each LED turn signal.
Some Things For Your Consideration:
- In-Line Resistors generate a significant amount of heat and can damage plastics as well as wiring and can result in fire if not properly installed. With that in mind it is important that they are mounted to a metal surface and also secured to eliminate any vibrations that might lead to the ceramic shielding.
- It is our opinion that you should never take a short cut on a project when it leaves room for uncertainty down the road. We strongly suggest not using the wire connectors that come in these kits, they do not guarantee a good connection and are prone to failure. Any time you are splicing wires we recommend soldering the connections or using self-soldering butt connectors .
- Sold in pairs
- 20 Watt / 8.5 Ohm heavy duty options available
- Included are 4 wire splice connectors that you should throw in the trash