This flexible LED array can be integrated into your frame or tail section for a very clean look, while still being safe and effective thanks to the excellent visibility of LED’s. The array is comprised of 3 different sections of LED’s; the outer sections are used for turn signals* and the middle section uses a dual-intensity element design so it can be used for your tail light and brake light.
If you intend to use this LED as a running light and brake light you will need either the Dual Element Circuit
(INCLUDED WITH EACH FLEXIBLE LIGHT ORDER) or the Motogadget m-Unit
in order to have the voltage modulation necessary to operate as both.
The LED lengths available are: (end cap to end cap dimensions)
8.2 - center 3.6in with 1.8in turns
10 - center 4.2in with 2.4in turns
11.2 - center 5.4in with 2.4in turns
14.7 - center 7.8in with 3in turns
Installation is very simple via a double-sided tape applied to the back of the LED’s
and all wiring exits through the back of one end of the array.
Flexible on the horizontal plane only, not vertical.